Pack Fixation 7
Angle Support with Studs for Delta L+
This support is specifically designed for the installation of a crack sensor DELTA L+ on solid supports such as concrete, brick, or stone.
Features:
Fixation by galvanized drive pins for a robust and durable anchor.
Installation of pins:
- Drilling Ø6 mm in the material.
- Inserting the pin with a hammer.
- Tightening the nut (10mm wrench) to secure the pin in place.
- Precaution: Avoid striking the pin head too hard and ensure the nut is tight to achieve optimal anchorage.
- Removal: Requires cutting the pin flush with a grinder, leaving the metal in the material.
Installation of the female socket:
- Drilling Ø8 mm.
- Full insertion of the socket into the support (it must be flush).
- Locking by striking with a striking tool or, if necessary, a fine screwdriver.
Fixing the ball joint:
- Screws onto the female socket with a 8mm wrench, ensuring a precise and secure adjustment.
4o
Questo prodotto non è più disponibile.
Votre snippet dynamique sera affiché ici...
Ce message s'affiche parce que vous n'avez pas défini le filtre et le modèle à utiliser.
Altri Prodotti
che potrebbero interessarti
Votre snippet dynamique sera affiché ici... Ce message est affiché parce que vous n'avez pas défini le filtre et le modèle à utiliser.